Table of Contents
Advertisement
(9) FSK polarity
Normal and reverse polarities are available for FSK
operation. This item allows you to select one of these
polarities.
"FSK-REV off" (normal):
key open (mark); key close (space)
"FSK-REV on" (reverse):
key open (space); key close (mark)
(10) CW break-in
The CW break-in function (in A1A mode) toggles
transmit and receive with CW keying. Full break-in al-
lows you to receive signals between transmitted key-
ing pulses during CW transmission. Semi break-in
allows you to mute receiving until keying stops with
some delay time.
(11) Microphone keys
This item activates/deactivates the keys on the HM-
120
("P", "Y" and "Z"). Refer to
HAND MICROPHONE
p. 4 to program the "P" key.
(12) Remote control busy timer
This sets the time for which operation of one remote
controller is inhibited while operating the other. The
timer can be set from 0 to 180 sec.
(13) ID number setting for remote control
When connecting an external controller such as a
personal computer, 2-digit ID codes are required to
access the transceiver. The IC-M701RT adopts
NMEA0183 format and uses a "proprietary sentence"
for remote control. ID 01 to 99 are available.
(14) Remote control input terminal
Remote control signals can be input via the [RS-
232C] socket or [CLONE] jack.
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
SET MODE
FSK normal
(default)
FSK reverse
Full break-in
Automatic keying without
delay time (default)
Semi break-in
Automatic keying with delay
time
OFF
Manual transmission
necessary for keying
Microphone keys
activated.
(default)
F
Microphone keys
deactivated.
F
Busy timer: 5 sec.
(default)
F
NMEA ID: 03
(default)
F
[REMOTE] socket
(default)
F
[CLONE] jack
F
6
15
Advertisement
Table of Contents
