Hitachi Director's P50X901 Operating Manual page 73

Setup
5. Use the CURSOR PAD
"Other" from brand name choices.
6. Use the CURSOR PAD
"Learning Mode" then press the SELECT
button.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the B rand Name of your
A/V Receiver. If you can not find the
B rand Name, please choose "Other" and
proceed to the Learning mode by pushing
the Learning Mode B utton.
B rand Name Other
Learning Mode
Move Change B rand Name
7. Use the CURSOR PAD
select the Soft Key to learn (Ex. VOL
press the SELECT button.
AV Net Setup Wizard : Custom Settings
Select the A/V Receiver softkey to learn?
TV Softkeys
POWER CH VOL
MUTE CH VOL
SOURCE 1 SOURCE 2 SOURCE 3
SOURCE 6 SOURCE 7 SOURCE 8
Move SEL Select
8. Press and hold the VOL
Receiver remote control while pointing directly
at the learning AV NET sensor of the Plasma
TV (located at the lower right corner of the
screen) at a distance of 3.2 feet or 1 meter
maximum.
AV Net Setup Wizard : A/V Receiver Setup
Press and hold desired button to transfer the
command to AV NET.
VOL
Please wait while AV NET
Learns the command....
Move SEL Select
9. If the IR code transfer was not completed, the
screen below appears. Repeat step 8 to try
again.
AV Net Setup Wizard : A/V Receiver Setup
VOL
Transfer not completed!
Try again?
Move Select
SEL
10. If the IR code transfer was successful, the
or to select
or to highlight
B ack Next
11. Select another Soft Key to learn or select
, , and to
), then
AUDIO
SOURCE 4 SOURCE 5
SOURCE 9 SOURCE 10
12. Select the Test button VOL
B ack Done
button of your A/V
13.
14. Use the CURSOR PAD
15. Use the CURSOR PAD
Cancel OK
screen below appears, then select "OK" to
continue setup.
AV Net Setup Wizard : A/V Receiver Setup
VOL
Transfer was successful.
Press OK to store and continue.
Cancel
Move Select
SEL
DONE to move on to the next screen.
AV Net Setup Wizard : Custom Settings
Select the A/V Receiver softkey to learn?
TV Softkeys
POWER CH VOL
MUTE CH VOL AUDIO
SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4
SOURCE 6 SOURCE 7 SOURCE 8 SOURCE 9
B ack
Move SEL Select
response of the device to this command.
Test Buttons will show you first learned keys
with a maximum of 3.
Use the CURSOR PAD ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Select the Test button. If device
responds to this command, proceed to
"Next". Otherwise, try another IR
Code Set number.
B rand Name Other
IR Code Set Other
Learning Mode
Test B utton
VOL
B ack
Move IR Out
SEL
or
Input that connects to the video and audio
output of the A/V Receiver.
,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
B rand Name Other
IR Code Set Other
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
TV Input Not Connected
B ack
Change Input Select
Move SEL
OK
SOURCE 5
SOURCE 10
Done
to check the
, and to
Next
to select the TV
, and to
Next
73