Hitachi Director's P50X901 Operating Manual page 70

Setup
AV NET SETUP WIZARD ( Example: A/V
RECEIVER Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
B efore starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move Return
SEL
2. Use the CURSOR PAD
YES or NO.
3. Press the SELECT button to select "YES".
(Select YES to setup an A/V Receiver or NO to
setup other devices).
4. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver?
Move Select
SEL
5. Use the CURSOR PAD
brand name of your A/V Receiver.
6. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the B rand Name of your
A/V Receiver. If you can not find the
B rand Name, please choose "Other" and
proceed to the Learning mode by pushing
the Learning Mode B utton.
B rand Name Hitachi
Learning Mode
Move Change B rand Name
7. Use the CURSOR PAD
preset IR Code.
8. Use the CURSOR PAD
"POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
9. Press the SELECT button to pass the Power
command through the IR Blaster and onto the
A/V Receiver ( Repeat steps 7 to 9 until finding
the IR code that will power up the A/V
Receiver. If the A/V Receiver turns ON, then
you have found the correct preset IR code ).
70
B ack Start
or to highlight
, , and to
Yes
No
B ack Next
or to choose the
, , and to
(1/54)
B ack Next
or to choose the
to highlight the
10. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the IR Code Set number.
If the matched Code does not exist,
please choose "Other" and proceed to
the Learning mode.
B rand Name Hitachi
IR Code Set 1 (1/12)
Learning Mode
Test B utton
POWER
Move Change IR Code
11. Use the CURSOR PAD
Input that connects to the video and audio
output of the A/V Receiver.
12. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
B rand Name Hitachi
IR Code Set
3 (3/12)
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
TV Input Not Connected
Change Input
Move
13. Use the CURSOR PAD
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
receiver. Select " Not Connected " if not used.
14. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
B rand Name Hitachi
IR Code Set 3 (3/12)
TV Input Not Connected
Monitor Out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please select
an A/V Receiver Source.
Monitor Out Not Connected
Optical Out Not Connected
Change Source
Move
, , and to
(44/54)
SOURCE 1 VOL
B ack Next
or to select the TV
, , and to
(44/54)
B ack Next
Select
SEL
or to select the
, , and to
(44/54)
B ack Next
Select
SEL