Hitachi Director's P50X901 Operating Manual page 25

Connecting External Video Sources
Your HITACHI Plasma Television is equipped with a G-LINK
TM
TV Guide On Screen system to enable VCR recording features. Once you setup the G-LINK
connector, then you can use your HITACHI Plasma TV Remote Control and TV Guide On Screen
system to control your VCR recording features.
The Plasma Television Rear Panel has IR OUT/G-LINK
2 external Audio/Video components. Please see the following example of a G-LINK
HITACHI Plasma Television and external Audio/Video equipment (VCR).
CONNECTING THE VCR TO G-LINK
1. Connect your external Audio/Video components to the Rear Panel shown below.
2. Connect the IR Blaster cable to the IR OUT/G-LINK
3. Place the IR Blaster in front of the infrared sensor of the external components you want to control.
4. To access the TV Guide On Screen
press the MENU button.
5. Use the CURSOR PAD
to highlight TV Guide On Screen
6. Press the SELECT or CURSOR PAD
select.
7. Follow the Setup procedure on pages 54-56.
NOTE: 1. The IR Blaster must be placed in front of the external components infrared sensor for the G-LINK
work.
TM
2. G-LINK connections are available on both IR OUT terminals.
TM
terminals. One IR Blaster cable can connect up to
TM
FOR TV Guide On Screen
TM
TM system,
or channel scroll down
TM
.
button to
TM
feature. This connection is necessary for the
TM
TM
SYSTEM
output terminal of the Rear Panel.
V L R V L R
INPUT
OUTPUT
Infrared
Sensor
VCR
IR
Blaster
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move Select
SEL
TM
(IR Blaster)
TM
setup between your
TM
feature to
25