HP Kayak XA User Manual page 58

crystal.bk : cryst-2.fb4 Page 42 Monday, March 23, 1998 4:09 AM
Wide SCSI devices should be
connected to a free SCSI connector
on the SCSI cable (you can add up
to five SCSI devices).
IDE drives should be connected to a
free IDE connector on the IDE cable
(you can add up to two IDE devices).
Up to 13 external SCSI devices can be
connected via the external SCSI
connector.
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
8 Locate the appropriate data cable for the hard disk drive.
9 Connect the power cable and the data cable to the rear of the drive.
(The connectors are shaped to go in one way only.)
Data Cable
10 Install any other accessories before completing the installation.
11 Turn to page 46 to complete the installation.
42 English
Narrow SCSI devices should be
connected to a free SCSI connector on
the SCSI cable (you can add up to two
SCSI devices).
Power Cable