HP Kayak XA User Manual page 46

crystal.bk : cryst-2.fb4 Page 30 Monday, March 23, 1998 4:09 AM
WARNING
Slide the power
supply unit clear of
the computer
Replacing the Power
Supply after Installing
Accessories
2 How to Install Accessories Inside Your PC Workstation
Moving the Power Supply
To avoid electrical shock, do not open the power supply.
6 Slide the power supply out of the computer until it stops—the power
supply unit remains connected to the computer.
1 Check that all internal cables are safely routed.
2 Slide the power supply back into the computer.
3 Tighten the four self-retaining screws.
4 Replace the HP UltraFlow airflow guide.
5 Reconnect the fan to the system board.
30 English
Power Supply