HP Kayak XA User Manual page 124

crystal.bk : cryst-4.fb4 Page 108 Monday, March 23, 1998 4:09 AM
Boot Device
Configuration Menu
4 Technical Information
Configuring a SCSI Accessory
This menu lets you configure the SCSI boot device. To find out the
SCSI ID of a specific SCSI device, you can run the SCSI Disk Utilities
(refer to page 112).
Boot Device Configuration
Select SCSI peripheral from which to boot
To view peripheral by ID# select "SCSI Disk Utilities" from previous menu
Boot SCSI ID ................................................. 0
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled
Boot LUN Number .............................................. 0
Use the and keys to move between options. Press
display a menu with a selection of values.
• Boot SCSI ID
This parameter is the SCSI ID of the boot device. The default value
is 0.
• Boot Lun Number
More advanced SCSI devices can have several logical units. This
option indicates the logical unit (or Lun) on which to boot for the
drive chosen in the
Boot SCSI ID
108 English
. The default value is 0.
to