6.10 System Board
1. Prepare the computer for disassembly (Section 6.1).
2. Remove both the right and left access panels (Section 6.2).
3. Remove the front bezel (section 6.3).
4. Remove the diskette drive (Section 6.7.3).
5. Disconnect the power, and data cables from the back of all installed 3.5" drives.
6. Remove 3.5" Hard Drive (Section 6.7.4).
7. Disconnect all cables from the system board.
8. Remove the heatsink from the system board (Section 6.9).
9. Remove the six screws that secure the system board to the chassis 1.
10. Lift up the system board to remove it 2.
To install the system board, reverse the removal procedure.
✎
The system board shown may be different from the one installed in your computer.
Service Reference Guide, d260
Removal and Replacement Procedures - Microtower Type Chassis
377977-AA1
6–17