Port Isolation Configuration; Port Isolation Overview - 3Com E4500-24 Cli Configuration Manual

1

Port Isolation Configuration

When configuring port isolation, go to these sections for information you are interested in:

Port Isolation Overview

Port Isolation Configuration
Displaying and Maintaining Port Isolation Configuration
Port Isolation Configuration Example
Port Isolation Overview
The port isolation feature is used to secure and add privacy to the data traffic and prevent malicious
attackers from obtaining the user information. With the port isolation feature, you can add the ports to be
controlled into an isolation group to isolate the Layer 2 and Layer 3 data between each port in the
isolation group (a port in an isolation group does not forward traffic to the other ports in the isolation
group).
The ports in an isolation group must reside on the same switch or different units of an XRN fabric
Currently, you can create only on isolation group on a Switch 4500 series switch. The number of
Ethernet ports in an isolation group is not limited.
An isolation group only isolates the member ports in it.
Port Isolation Configuration
You can perform the following operations to add an Ethernet port to an isolation group, thus isolating
Layer 2 and Layer 3 data among the ports in the isolation group.
Follow these steps to configure port isolation:
To do ...
Enter system view
Enter Ethernet port view
Add the Ethernet port to the
isolation group
Use the command ...
system-view
interface interface-type
interface-number
port isolate
1-1
Remarks
—
—
Required
By default, an isolation group
contains no port.