HP OmniBook 7100 Reference Manual page 97

10. Create the Primary and Extended DOS partitions. You will need at least 300 MB
for the Primary Partition.
11. Make the C: an active partition.
12. Choose Exit to MS-DOS from the Windows 95 Startup Menu.
13. From the A: prompt, type Format C:, then type SYS C:.
14. Create a C:\Windows\Options\Cabs directory by typing the following:
Mkdir C:\Windows
Mkdir C:\Windows\Options
Mkdir C:\Windows\Options\Cabs
15. Insert the Windows 95 CD into the CD-ROM drive.
16. Copy the Windows 95 installation files to your hard drive by typing:
C:
Copy G:\Win95\*.* C:\Windows\Options\Cabs
17. Restart the OmniBook, the begin the installation by typing:
C:\Windows\Options\Cabs\Setup
18. Press Enter to begin a routine check of the system.
19. When the following error appears, press the ESC key to continue.
This version of Microsoft Scandisk will work only with MS-DOS version 5.0 and
later. Setup found a compressed volume or a disk-cache utility on your
computer. Quit setup and check your compressed volume with your disk
compression software or remove the disk cache utility. Then run setup again or
choose Esc to continue with setup.
20. Click Yes to accept the license
21. When prompted, select Other Directory and click Next. Enter C:\Windows for
the path, click Next, and then click Yes to continue with the specified directory.
22. Choose Portable on the Setup Options screen, then click Next.
23. Enter the appropriate User Information, then click Next.
24. Enter the Product Identification Number, then click Next. The Product
Identification Number is located on the Certificate of Authenticity that you
received with your retail version of Windows 95.
25. Do not detect any Network, Sound, MIDI, or Video Capture Card devices, then
click Next.
26. Follow the prompts until the end of the installation, and then reboot.
Using the Recovery CD
6-7