Serial, Parallel, And Usb Problems - HP OmniBook 7100 Reference Manual

Serial, Parallel, and USB Problems

If the serial mouse doesn't work
First, make certain you followed the manufacturer's installation instructions
completely and everything necessary to install the mouse properly.
Check the port connection (may be loose).
If a serial modem doesn't work properly
In Windows Help use the modem troubleshooter.
Check the port connection (may be loose).
If an I/O card stops communicating properly
It may have been reset if the OmniBook suspended or turned off. Exit and restart
the application.
If the serial or parallel port is not working
Check the port connection (may be loose).
Check settings in BIOS Setup.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the System Devices menu, check that Parallel and Serial are enabled.
If the USB port is not working
Windows NT 4.0 does not support USB devices.
Contact the vendor of the peripheral device, as well as Hewlett-Packard, for the
latest versions of the USB drivers.
Troubleshooting
7-13