Compaq Evo N200 Hardware Manual page 51

The locations the computer can search for bootable media and
devices varies by model and configuration.
Use the Setup utility to view the devices the computer can start
from in your system or to change the sequence in which the
computer searches these devices.
1. To access the Setup utility, turn on or restart the computer,
then press
F10 message is displayed in the lower left corner of the
screen.
2. Select Boot from the menu bar. (To select a menu, press
shift +
can start from are displayed in the current startup sequence.
3. To change the startup sequence:
a. Select a device by using the
b. Press
4. To save your preferences and exit the Setup utility, press the
esc
Changes by pressing the
instructions on the screen.
✎
Changing the startup sequence also changes the logical drive
designations. For example, if you start from a hard drive in a
Mobile Expansion Unit, that hard drive becomes drive
computer hard drive becomes drive
Hardware Guide
while the To Change System Settings, Press
F10
the or
home
the
shift +
beginning or end of the startup sequence.
key (or select Exit from the menu bar), select Exit Saving
arrow key.) The devices the computer
end
pg up
or key to move the device toward the
+ –
arrow key, then follow the
Pg dn
D
Removable Drives
or arrow keys.
pg dn
.
and the
C
5–7