Compaq Evo N200 Hardware Manual page 38

Battery Packs
4. Remove or insert the battery pack:
❏
Removing a primary battery pack
❏
Inserting a primary battery pack
4–4
To remove a battery pack: Slide the battery release latch
toward the rear of the computer 1 while tilting the
battery pack out of the battery bay 2 . Remove the battery
pack 3 .
To insert a battery pack: Insert the battery pack into the
battery bay at a 45 degree angle 1 , then tilt the battery
pack downward into the battery bay until it is
seated 2 .
Hardware Guide