Grizzly G0443 Instruction Manual page 6

. Fasten the square pipe to the top of the fil-
14
ter.
15. Insert the new brush and base on the square
pipe. Make sure the pulley, brush screw, and
the holes at the top of the filter are aligned.
. Fasten the square pipe base to the filter
16
frame.
. Feed the new cable up through the brush,
17
over the pulley, and back down through the
brush, making sure the brush screw is facing
the pulley.
. Feed both ends of the cable through the top
18
of the filter.
. Feed the gasket over the cable and seat it
19
firmly on top of the filter.