Grizzly G0443 Instruction Manual page 4

.
Use a razor or putty knife to cut the silicone
2
around the filter intake port.
. Cut the silicone around the black box.
3
.
Unfasten the screws under the black box,
4
and pry off the box plate.
.
Separate the intake port from the black box,
5
and completely clean off all remaining sili-
cone.
. Pull or cut off the existing handle covers,
6
loosen the screw above the handles, and
remove the handles from the cable.
.
Unfasten the bolt at the top of the filter.
7