Gigabyte GA-VM800PMC User Manual page 75

Basic 6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio output
without any additional module.
STEP 1:
Connect the front channels to "Line Out",the rear
Line In
channels to "Line In", and the Center/Subwoofer chan-
nels to "MIC In".
MIC In Line Out
STEP 2:
After installing the audio driver, you'll find a VIA
Audio Deck icon on the lower right hand taskbar.
Double-click the icon to open the Audio Control
Panel.
STEP 3:
In the Audio Control Panel, click the Speaker tab
and select the 6 Channel check box.
STEP 4:
In the Audio Control Panel, click the Phone Jack
tab and select the Enable Smart5.1 Plus (blue
jack for side surround and red jack for cen-
ter/LFE speakers output check box.
- 75 - Appendix