Front Panel Jumper - Gigabyte GA-965P-DQ6 User Manual

13) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
MSG (Message LED/Power/Sleep LED)
(Yellow)
PW (Power Switch)
(Red)
SPEAK (Speaker Connector)
(Amber)
HD (IDE Hard Disk Active LED)
(Blue)
RES (Reset Switch)
(Green)
NC ( Purple)
GA-965P-DQ6 Motherboard
Message LED/
Power
Power/
Switch
Sleep LED
2
1
Reset Switch
IDE Hard Disk Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal
Close: Power On/Off
Pin 1: Power
Pin 2- Pin 3: NC
Pin 4: Data(-)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal
Close: Reset Hardware System
NC
- 26 -
Speaker Connector
20
19