Gigabyte GA-965P-DQ6 User Manual page 61

Intel coretm 2 extreme quad-core / coretm 2 quad / intel coretm 2 extreme dual-core / coretm 2 duo / intel pentium processor extreme edition / intel pentium d / pentium 4 lga775 processor motherboard
Hide thumbs Also See for GA-965P-DQ6:
Table of Contents

Advertisement

b. Select the floppy drive or hard drive where the BIOS file is saved, such as "Floppy A" and
press ENTER.
Boot From.................................................
Main ROM Type/Size...............................
Backup ROM Type/Size...........................
PgDn/PgUp: Modify
c . Select the BIOS file and press ENTER.
Make sure again the BIOS file matches your motherboard model.
Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen.
When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update
will begin and the current process will be displayed.
1. Do not turn off or restart the system when the system is reading/updating the BIOS.
2. Do not remove the floppy disk or hard drive/USB drive when the system is updating the BIOS.
Step 3: When the update process is complete, press any key to return to the Dual BIOS / Q-Flash main
menu.
Boot From.................................................
Main ROM Type/Size...............................
Backup ROM Type/Size...........................
PgDn/PgUp: Modify
Dual BIOS Utility V2.03
Main Bios
MXIC SPI Serial Fla
MXIC SPI Serial Fla
Wide Range Protection
Disable
Boot From
0 file(s) found
Main Bios
Floppy A
Auto Recovery
Enable
HDD 0-0
Halt On Error
Disable
Keep DMI Data
Enable
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Update Main BIOS from Drive
Total size : 0
Update Backup BIOS from Drive
F5 : Refresh
DEL : Delete
Save Main BIOS to Drive
Save Backup BIOS to Drive
: Move
Dual BIOS Utility V2.03
Main Bios
MXIC SPI Serial Fla
MXIC SPI Serial Fla
Wide Range Protection
Disable
Boot From
Main Bios
Auto Recovery
Enable
Halt On Error
Disable
Keep DMI Data
Enable
!! Copy BIOS completed - Pass !!
Copy Main ROM Data to Backup
Please press any key to continue
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Update Main BIOS from Drive
Update Backup BIOS from Drive
Save Main BIOS to Drive
Save Backup BIOS to Drive
: Move
- 61 -
1M
1M
<Drive>
<Drive>
Free size : 0
ESC: Reset
F10: Power Off
1M
1M
ESC: Reset
F10: Power Off
Appendix

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents