Gigabyte GA-965P-DQ6 User Manual page 46

CPU Host Frequency(Mhz)
100Mhz ~ 700Mhz Set CPU Host Clock from 100 MHz to 700 MHz.
The actual range depends on the CPU you install.
If you use a 533 MHz FSB processor, please set CPU Host Frequency to 133 MHz.
If you use an 800 MHz FSB processor, please set CPU Host Frequency to 200 MHz.
If you use a 1066 MHz FSB processor, please set CPU Host Frequency to 266 MHz.
If you use a 1333 MHz FSB processor, please set CPU Host Frequency to 333 MHz.
PCI Express Frequency(Mhz)
Auto
90Mhz ~ 150Mhz Set PCI Express frequency from 90 MHz to 150 MHz.
C.I.A.2
C.I.A.2 (CPU Intelligent Accelerator 2) is designed to detect CPU loading during software program
executing, and automatically adjust CPU computing power to maximize system performance.
If you wish to adjust the item manually, set "System Voltage Control" to "Auto" to optimize the
system voltage settings.
Disabled Disable this function. (Default value)
Cruise Set C.I.A.2 to Cruise. Automatically increase CPU frequency(5%,7%) by CPU
loading.
Sports Set C.I.A.2 to Sports. Automatically increase CPU frequency(7%,9%) by CPU
loading.
Racing Set C.I.A.2 to Racing. Automatically increase CPU frequency(9%,11%) by CPU
loading.
Turbo Set C.I.A.2 to Turbo. Automatically increase CPU frequency(15,17%) by CPU
loading.
Full Thrust Set C.I.A.2 to Full Thrust. Automatically increase CPU frequency(17%, 19%) by
CPU loading.
Warning: Stability is highly dependent on system components.
System Memory Multiplier
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue. If you wish to adjust the item manually, set
"System Voltage Control" to "Auto" to optimize the system voltage settings.
Memory Frequency (Mhz)
The first memory frequency value is the normal frequency of the memory being used; the second
is the memory frequency automatically adjusted according to the CPU Host Frequency(Mhz)
and System Memory Multiplier settings.
(Note 2) Applies only when the GA-965P-DQ6 motherboard (rev. 3.3) is installed with a 1333 MHz FSB
processor. The system will automatically adjust BIOS to support 1333 MHz FSB by overclocking
when a 1333 MHz FSB processor is installed. In such a configuration, the actual operating
memory frequency will be 667 MHz or 833 MHz, depending on the memory being installed.
GA-965P-DQ6 Motherboard
Set PCI Express frequency automatically. (Default value)
- 46 -
(Note 2)