F_Panel (Front Panel Jumper) - Gigabyte GA-K8NF-9-TA User Manual

10) F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
SPEAK (Speaker Connector)
(Amber)
PW (Power Switch)
(Red)
MSG (Message LED/Power/Sleep LED)
(Yellow)
RES (Reset Switch)
(Green)
HD (IDE Hard Disk Active LED)
(Blue)
NC (Purple)
SPEAK-
Speaker Connector
SPEAK+
Power Switch
PW+
Message LED/
MSG+
Power/
Sleep LED
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 21 -
19
20
NC
PW- RES+
RES-
MSG-
HD-
HD+
2 1
Hardware Installation
Reset Switch
IDE Hard Disk
Active LED