Table of Contents
Advertisement
18) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
If you want to erase CM OS...
1.Turn OFF the computer and unplug the ATX 12V power cord.
2.Enable clear CMOS function.
3.Plug the ATX 12V power cord and turn ON the computer.
19) BAT (Battery)
1
Open: Normal
1
Close: Clear CMOS
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CM OS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
- 27 -
Hardware Installation Process
Hide quick links:
Advertisement
Table of Contents
