Table of Contents
Advertisement
F OnChip IDE Channel0
M
When enabled, allows you to use the onboard primary PC I IDE. If a hard disk controller card
is used, set at Disabled.
Enable onboard 1st channel IDE port. (Default v alue)
8Enabled
Disabl e onboard 1st channel IDE port.
8Disabled
F OnChip IDE Channel1
MWhen enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card
is used, set at Disabled.
Enable onboard 2nd channel IDE port. (Default v alue)
8Enabled
Disabl e onboard 2nd channel IDE port.
8Disabled
F IDE1 Conductor Cable
Will be automati c ally detected by BIOS (Default Value)
8Auto
8ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice
and cable i s compatible with ATA66/100/133)
Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
8ATA33
is compat i ble with ATA33)
F IDE2 Conductor Cable
Will be automati c ally detected by BIOS (Default Value)
8Auto
8ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice
and cable i s compatible with ATA66/100/133)
Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
8ATA33
is compati b le w i t h ATA33).
FAC97 Audio
BIOS w ill automatically detect onboard AC97 Audi o . (Default v alue)
8Auto
Disabled AC97 Audio.
8Disabled
FUSB 1.1 Control ler
MDisable this option if you are not using the onboard U SB feature.
Enabl e d USB Controller. (Default value)
8Enabled
Disabl e d USB Controller.
8Disabled
GA-7VAX/GA-7VAXP Motherboard
- 36 -
Advertisement
Table of Contents
