Security - TP-Link TD-W8950ND User Manual

TD-W8950ND
more WLANs. If this checkbox is selected, you will have to set the following parameters as
shown below. Make sure the following settings are correct
SSID(to be bridged): The SSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the SSID to join.
BSSID(to be bridged): The BSSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the BSSID to join.
Search: Click this button, you can search the AP which runs in the current channel.
Key type: This option should be chosen according to the AP's security configuration.It is
recommended that the security type is the same as your AP's security type
WEP Index: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It
indicates the index of the WEP key.
Auth Type: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It
indicates the authorization type of the Root AP.
Password: If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
Click Apply/Save to save your settings.

4.6.2 Security

Choose menu "Wireless→Security", you can configure the security settings of your wireless
network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key),
WPA-PSK (Pre-Shared Key).
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
61