TP-Link TD-W8960N Quick Installation Manual page 2

Plug the provided
Adapter into the Power jack
on the back of the Modem
Router and the other end to a
standard electrical
socket.
Turn on all of your network devices, including your computer(s) and the
Modem Router then check to see if the LEDs of the Modem Router display
normally as the diagram below describes.
Power: Solid light
ADSL: Flashing
or solid light
WLAN: Flashing
LAN: Flashing or solid
light if the corresponding
port is connected
Note
If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter, phone line and Ethernet cable) are well
connected to your device. With the phone line well connected, if the
ADSL LED turns off after a quick-flash, please contact your ISP to ensure
that your internet connection is active.
Power
wall
2