Safety Instructions - NETGEAR GSM7228PS-100NAS Hardware Installation Manual

Managed Stackable Switches GSM7200PS and GSM7300S Series Hardware Installation Guide
The module bays support any combination of the following:
• ProSafe 10-Gigabit Ethernet XFP Adapter (AX741)
• SFP+ Adapter AX743
• CX4 Adapter AX744
• ProSafe 24-Gigabit Stackable Module AX742.
For more information, see
Module Bays" on page 2-21.

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect
your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions.
• Observe and follow service markings.
- Do not service any product except as explained in your system documentation.
- Opening or removing covers that are marked with the triangular symbol with a
lightning bolt may expose you to electrical shock. Only a trained service
technician should service components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your system components, and never operate the product in
a wet environment. If the system gets wet, see the appropriate section in your
troubleshooting guide or contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the
electrical ratings label. If you are not sure of the type of power source required, consult
your service provider or local power company.
"Adapters and Modules Compatible with the High-Speed I/O
Chapter 1: Introduction | 15