Midi Settings - Casio XW-P1 User Manual

Other Useful Functions

MIDI Settings

1. 7
Press SETTING.
bq
2.
Use the down (w) button to select
"MIDI >Ent" and then press
3. bq
cursor (U, q, w, I) buttons to
Use the
select the item you want, and then use the
bq
dial or minus (–) and plus (+) buttons to
change its setting.
Setting Item
Display
Device ID. Selects the ID number of
the Synthesizer for MIDI system
exclusive message send/receive.
• While "All" is selected, a system
exclusive message is sent
Device ID
regardless of the ID number.
• For details about the ID number,
see MIDI Implementation at
http://world.casio.com/.
Basic channel. Specifies the receive
channel of "Perform NRPN", "S.Seq
Basic Ch
NRPN", and other MIDI messages
described below.
MIDI OUT select. Specifies what is
output as MIDI OUT.*
KEY (Keyboard): Synthesizer
keyboard play, operations, etc.
MIDIOutSel
MIDI (MIDI IN): Messages input via
bt
MIDI IN (MIDI THRU)
USB (USB IN): Messages input via
bt
USB
USB out select. Specifies what is
output as USB out.*
KEY (Keyboard): Keyboard and
USBOutSel
other Synthesizer operations.
MIDI (MIDI IN): Messages input via
bt
MIDI IN
MIDI IN on/off (MIDI IN enable).
While this setting is turned on,
MIDI In messages input via
reflected by the Synthesizer's
internal sound source.
USB IN on/off (USB IN enable).
While this setting is turned on,
USB In messages input via
reflected by the Synthesizer's
internal sound source.
Sync mode. Settings for MIDI
syncing between the Synthesizer
and an external device.*
Off: No syncing
Mast (Master): Outputs Clock, Start/
Stop (Step Sequencer), and other
signals from the Sequencer to
control an external device.
Sync Mode
Slav (Slave): Receives Clock, Start/
Stop, and other signals from an
external device.
• Step Sequencer and Phrase
Sequencer playback is not
possible unless Clock is received.
Start/Stop is interpreted as Step
Sequencer start/stop.
E-70
bq
ENTER.
Description Settings
1 to 16, ALL
1 to 16
Refer to the
cell to the
left.
Refer to the
cell to the
left.
bt
MIDI IN are Off, On
bt
USB are Off, On
Refer to the
cell to the
left.
Display
Perform NRPN
bo
S.Seq NRPN
Phrase NRPN
Arp NRPN
* To apply setting changes, turn the Synthesizer off and then
back on again. A message to that effect appears on the
display whenever you exit a setting screen.
4.
After settings are the way you want, press
SETTING to exit the setting screen.
• You can also use performance data editing to change the
MIDI data send channel and configure other settings. For
more information, see the "MIDI >Ent" group (page E-66).
Description
Performance NRPN change.
When this setting is turned on, a
Synthesizer performance (page
E-63) can be selected by a MIDI
NRPN message from an external
device.
Step Sequencer NRPN change.
When this setting is turned on, a
Synthesizer sequence (page E-51)
can be selected by a MIDI NRPN
message from an external device.
Phrase NRPN change. When this
setting is turned on, a Synthesizer
phrase (page E-44) can be selected
by a MIDI NRPN message from an
external device.
Arpeggio NRPN change. When this
setting is turned on, a Synthesizer
arpeggio type (page E-40) can be
selected by a MIDI NRPN message
from an external device.
Settings
Off, On
Off, On
Off, On
Off, On
7