Table of Contents
Advertisement
Other Useful Functions
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital Interface, which is the name of a worldwide standard for digital signals and
connectors that makes it possible to exchange musical data between musical instruments and computers (machines) produced by
different manufacturers.
For details about the MIDI specifications of this Synthesizer, see the "MIDI Implementation" document at the website located at the
URL below.
http://world.casio.com/
• Use a separately available or commercially available MIDI cable to connect the MIDI terminals of your Synthesizer and another
electronic musical instrument for exchange of MIDI data (page E-8).
• For information about connecting a computer, see page E-92.
• For information about the relationship between each Synthesizer part (page E-78) and the MIDI IN and MIDI OUT channels, see
"Editable Performance Parameter List" (page E-73).
• This Synthesizer conforms to General MIDI Level 1 (GM).
MIDI Settings
7
1.
Press
SETTING.
2.
br
Use the
down (w) button to select "MIDI >Ent" and then press
3.
br
cursor (U, q, w, I) buttons to select the item you want, and then use the
Use the
minus (–) and plus (+) buttons to change its setting.
Settings
Display
Device ID. Selects the ID number of the Synthesizer for MIDI system exclusive message send/receive.
• While "All" is selected, a system exclusive message is sent regardless of the ID number.
Device ID
• For details about the ID number, see MIDI Implementation at
http://world.casio.com/.
Basic channel. Specifies the receive channel of "Perform NRPN", "S.Seq NRPN", and other MIDI
Basic Ch
messages described below.
MIDI OUT select. Specifies what is output as MIDI OUT.*
KEY (Keyboard): Synthesizer keyboard play, operations, etc.
MIDIOutSel
MIDI (MIDI IN): Messages input via
USB (USB IN): Messages input via
USB out select. Specifies what is output as USB out.*
USBOutSel
KEY (Keyboard): Keyboard and other Synthesizer operations
MIDI (MIDI IN): Messages input via
MIDI IN on/off (MIDI IN enable). While this setting is turned on, messages input via
MIDI In
reflected by the Synthesizer's internal sound source.
USB IN on/off (USB IN enable). While this setting is turned on, messages input via
USB In
by the Synthesizer's internal sound source.
Sync mode. Settings for MIDI syncing between the Synthesizer and an external device.*
Off: No syncing
Mast (Master): Outputs Clock, Start/Stop (Step Sequencer), and other signals from the Sequencer to
control an external device.
Sync Mode
Slav (Slave): Receives Clock, Start/Stop, and other signals from an external device.
• Step Sequencer and Phrase Sequencer playback is not possible unless Clock is received. Start/Stop is
interpreted as Step Sequencer start/stop.
Performance NRPN change.
Perform NRPN
When this setting is turned on, a Synthesizer performance (page E-72) can be selected by a MIDI NRPN
message from an external device.
Step Sequencer NRPN change. When this setting is turned on, a Synthesizer sequence (page E-52) can
S.Seq NRPN
be selected by a MIDI NRPN message from an external device.
Phrase NRPN change. When this setting is turned on, a Synthesizer phrase (page E-45) can be selected
Phrase NRPN
by a MIDI NRPN message from an external device.
E-82
Description
ck
MIDI IN (MIDI THRU)
ck
USB
ck
MIDI IN
br
ENTER.
bp
1 to 16, ALL
1 to 16
Refer to the cell to the
left.
Refer to the cell to the
left.
ck
MIDI IN are
Off, On
ck
USB are reflected
Off, On
Refer to the cell to the
left.
Off, On
Off, On
Off, On
br
dial or
Settings
Advertisement
Table of Contents
