General Product Care - GE 30385EE1 User Manual

Appendix
Caller ID
Problem Cause/solution
Caller-ID • You must subscribe to Caller ID service from your service
information is provider/telephone company.
not displayed.
• Make sure the base unit is plugged directly into a telephone
modular jack. If you are using a line with DSL service, make
sure you have properly installed the DSL filters supplied by your
service provider.
While on a call, • You must subscribe to Caller ID with Call Waiting service from
new caller-ID your service provider/telephone company.
information is
not displayed.
Answering system
Problem Cause/solution
The unit does • Make sure the answering system is on.
not record new
• The message memory may be full. Some messages will need to
messages.
be deleted.
Cannot operate • You must use a touch-tone telephone for remote access.
the answering
• Make sure you follow the remote access procedures in this
system
user's guide.
remotely.
Bluetooth
Problem Cause/solution
The GE 30385 • Check to see if your cell phone/headset's Bluetooth function is
won't pair/ turned on.
connect with
• Check your cell phone/headset's user's guide for instructions
my cell phone/
on Bluetooth device pairing.
headset.
• Make sure your cell phone/headset is near the base of the GE
30385.
• If GE 30385 appears in your cell phone's paried device list,
delete it and repeat the pairing steps in this user's guide.
• Turn your cell phone/headset off, then back on and try the
pairing steps again.
• Disconnect the AC adapter from the back of the telephone
base. Wait a few minutes, and then reconnect it. Repeat pairing
steps in this user's guide.
44
Appendix

General Product Care

• Avoid dropping the handset, as well as other rough treatment to the phone.
• Clean the phone only with a dry soft cloth.
• Never use cleaning agents, paint thinner, abrasive powder, alcohol, or other
chemical products to clean the unit. Doing so will damage the unit.
• Retain the original packaging in case you need to ship the phone at a later date.
45