Call Waiting; 3-Way Conference Call; Muting A Call; Speakerphone - GE 30385EE1 User Manual

Telephone operation
Using the telephone base:
1. Press on the telephone base when on a Line 2 call.
2. Dial the phone number using the dial pad keys.
3. Press to call from the Line 1 line.
Press or to switch between the Line 1 call and Line 2 call.

Call Waiting

If you subscribe to call waiting service from your telephone service provider, a call
waiting alert tone sounds when there is a second incoming call. If you subscribe to
both caller ID and call waiting with caller ID services, the second caller's information is
displayed after you hear the call waiting alert tone.
Using the telephone base:
• Press to answer the second incoming call.
• Press to switch between calls.

3-way conference call

When you have calls on both Line 1 line and Line 2 line, you can establish a 3-way
conference.
1. With calls on both lines, press the Options softkey.
2. Press / or use the scroll wheel to select Conference, then press the Select
softkey. A 3-way conference call is established.

Muting a call

The mute function allows you to turn off the microphone while on a call. You can hear
the other party but the other party cannot hear you.
Using the telephone base:
1. Press during a call. The telephone base screen displays Mute.
2. Press again to resume conversation. The telephone base screen displays
Talk.

Speakerphone

Anytime during a call, press on the telephone base to switch between
speakerphone and normal handset use.

Volume control

You can adjust the volume of the handset or speakerphone anytime during a call.
• Use the scroll wheel on the telephone base to increase or decrease the volume.
NOTE: Only the listening volume can be adjusted.
26
Telephone operation

Equalizer

This feature allows you to change the tone of the audio of the handset to best suit
your hearing. You can select Natural, Bass or Treble.
Using the telephone base:
1. During a call, press repeat/back/EQ on the left of the scroll wheel.
2. Press / or use the scroll wheel to select Natural, Bass or Treble.
3. Press the Select softkey to confirm.

Silencing the ringer

You can temporarily silence the ringer for an incoming call on a telephone base
without disconnecting the call.
• Press the Silence softkey, or use the scroll wheel to scroll the volume level to silent.

To put a call on hold

To put a Line 1 call on hold:
Press on the telephone base to put a Line 1 call on hold. The
flashes. Press on the telephone base to resume the call.
To put a Line 2 call on hold:
Press on a the telephone base to put a Line 2 call on hold. The
button flashes. Press on the telephone base to resume the call.
NOTE: If a call that is placed on hold is not picked up within 5 minutes, the call will be automatically
disconnected.

To make a call using the redial memory

The last ten telephone numbers previously dialed are stored in the redial list (up to 24
digits each).
Using the telephone base:
1. Press redial/select/skip on the right of the scroll wheel when in idle mode.
2. Press / or use the scroll wheel to scroll to the desired entry.
3. Lift the corded handset, or press
-OR-
Press to call from Line 2 line.
4. The number is dialed automatically.

To save a number from the redial list to the phonebook

Using the telephone base:
1. Press redial/select/skip located on the blue ring surrounding the scroll wheel.
2. Press / or use the scroll wheel to select the desired entry, then press the
Options softkey.
or to call from Line 1 line.
27
button