Fujitsu ScanSnap S510 Operator's Manual page 76

7. Open the Carrier Sheet and insert the document.
Align the fold with the right edge of the
Carrier Sheet so that the document fits into
the Carrier Sheet at the upper corner.
8. Load the Carrier Sheet onto the ScanSnap.
•
Load the Carrier Sheet with the portion
striped in black and white as the leading
edge as shown in the right figure.
•
Adjust the side guides to the width of the
Carrier Sheet to avoid skewing.
•
When the Carrier Sheet is used for
scanning, continuous scanning is not
possible. Scan one piece or one sheet at
one time.
9. Press the [SCAN] button
⇒
The front and back side images are merged into a double-page spread image.
56
.
SCAN
POWER