Fujitsu ScanSnap S510 Operator's Manual page 128

Output Image Size
HINT
108
You can specify an image size to output images of scanned documents.
You can select it from the following paper sizes.
Mode: Create facing pages in
one image
Automatic Detection
A3 (297 x 420 [mm])
-
-
-
-
-
B4 (JIS) (257 x 364 [mm])
-
-
-
11 x 17 (11 x 17 [in.],
279.4 x 431.8 [mm])
-
-
-
•
When you select [Automatic Detection] in the "Output image size" drop-down list,
scanned document sizes are automatically detected, and each image is output in a
standard size (other than Custom and Carrier Sheet Size) in the above table, which
best matches the original document size. You do not have to select a size in the
"Output image size" drop-down list every time.
•
When you select [Carrier Sheet size] in the "Output image size" drop-down list, images
are output in the Carrier Sheet size. With Adobe Acrobat, you can trim images to
create images in a preferred size.
In Adobe Acrobat, to trim an image, select [Tools] from the menu bar, and select
[Advanced Editing]
Crop tool, and then double-click the selected area.
Mode: Create front and back images
Automatic Detection
Carrier Sheet size (216 x 297 [mm])
A4 (210 x 297 [mm])
A5 (148 x 210 [mm])
A6 (105 x 148 [mm])
Post Card (100 x 148 [mm])
B5 (JIS) (182 x 257 [mm])
B6 (JIS) (128 x 182 [mm])
Letter (8.5 x 11 [in.],
216 x 279.4 [mm])
Business Card Portrait (55 x 90 [mm])
Business Card Landscape (90 x 55 [mm])
Custom (up to 10 sizes can be created)
[Crop tool]. Select an rectangular area you want to trim using the
separately
-
-
-