Fujitsu ScanSnap S510 Operator's Manual page 267

10. Rotate the roller bushing (left) by rotating it in the direction of the arrow.
Pick roller
Make sure that the Pick roller is completely attached. Otherwise, document
ATTENTION
jams or other feeding errors may occur.
11. Attach the sheet guide to the scanner.
Hold the pickup tabs on the sheet guide between the thumb and index finger, and then attach
the sheet guide to the scanner.
Sheet guide
9.3 Replacing the Pick Roller
Pick roller bushing Pick roller shaft
Pick-up tab
ScanSnap S510 Operator's Guide
9
Pick-up ta
247