Fujitsu ScanSnap S510 Operator's Manual page 61

4. Press the [SCAN] button
⇒
The scanning is started.
•
By default, documents are scanned in "Duplex" mode when you press the
HINT
[SCAN] button. In the "ScanSnap Manager - Scan and Save Settings" dialog
box, you can switch the scanning mode of the [SCAN] button to "Simplex"
mode.
•
Scanning can also be started by using the ScanSnap Manager icon
the task bar.
For details about this operation, refer to section "4.1 About the ScanSnap
Icon" (page 64).
•
Do not connect or disconnect other USB devices during the scanning
ATTENTION
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation.
⇒
The power indicator (lamp)
The following window appears to indicate the scanning status.
on the ScanSnap.
on the ScanSnap blinks blue during the scanning operation.
ScanSnap S510 Operator's Guide
3.1 Flow of Operations
on
S
S
41
3