Config Vlan; Show Vlan; To Add Ports 4 Through 8 As Tagged Ports To The Vlan V1; To Display The Switch’s Current Vlan Settings - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
DES-3026:4#delete vlan v1
Command: delete vlan v1
Success.
DES-3026:4#

config vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To add ports 4 through 8 as tagged ports to the VLAN v1:

DES-3026:4#config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
DES-3026:4#

show vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[add [tagged | untagged] |
delete] <portlist>}
This command allows the user to add or delete ports to the port list
of a previously configured VLAN. Additional ports may be specified
as tagging or untagging. The default is to assign the ports as
untagged.
<vlan_name 32> − The name of the VLAN to add ports to.
add − Specifies to add ports to a previously created vlan.
delete - Specifies to delete ports to a previously created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
<portlist> − A port or range of ports to be added to or deleted from
the VLAN.
Only administrator-level users can issue this command.
Used to display the current VLAN configuration on the Switch
show vlan {<vlan_name 32>}
This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member status of each port that is a member of
the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to display
a summary of settings.
None.
90