To Display Ip Interface Settings - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display IP interface settings.

DES-3026:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address
Subnet Mask
VLAN Name
Admin. State
Link Status
Member Ports
DES-3026:4#
Used to display the configuration of an IP interface on the Switch.
show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on the
Switch.
<ipif_name 12> - Enter the name of the IP interface for which to view the
settings. (System)
None.
: 10.48.74.122
: 255.0.0.0
: default
: Disabled
: Link UP
: 1-26
(MANUAL)
98