D-Link DES-3010G Command Line Interface Reference Manual page 31

Managed 8/16/24-port 10/100mbps n-way fast ethernet switch
Hide thumbs Also See for DES-3010G:
Table of Contents

Advertisement

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
create snmp user
Restrictions
Example usage:
To create an SNMP user on the Switch:
DES-3026:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DES-3026:4#
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
none – Adding this parameter will add no encryption.
Only administrator-level users can issue this command.
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMPname 32>
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<SNMPname 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3026:4#
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3010fDes-3018Des-30263010g

Table of Contents