Cutting Height Adjustment; Starting And Stopping - Flymo RE 320 Original Instructions Manual

J
grassbox
full
K
Cutting Height Adjustment (K) & (L)
• Height of cut is adjusted by raising or lowering the
Front and Rear Wheels.
• There are five heights of cut on this product.
• NOTE
A medium height of cut is recommended for most
lawns.
The quality of your lawn will suffer and collection will
be poor if you cut too low.
M
P
1
R
Visimo Only
grassbox
empty

Cutting Height Adjustment

2cm
4cm
6cm

Starting and Stopping

N
Q
Grassbox Full Window (Visimo Only)
• As the grassbox fills up, grass will be visible through
the window (J).
• When the window/grassbox is full it is time to empty
the grassbox.
L
HEIGHT OF CUT
Low
Low to Medium
Medium
Medium to High
High
To Start your Lawnmower
1. Form loop in mains cable and push the loop through
the slot. (M)
2. To secure, position loop over the hook and pull the
cable back through the slot (N).
3. Connect plug to mains and switch on.
4. Tilt the handle downwards to slightly raise the front of
the lawnmower and to reduce the risk of lawn damage
whilst starting.
The switchbox is provided with a lock-off button (P1) to
prevent accidental starting.
5. Press and hold the lock-off button (P) on the switch-
box, then squeeze one of the Start/Stop levers towards
the upper handle (Q).
6. Continue to squeeze the start/stop lever towards the
upper handle and release the lock-off button (R).
7. Lower the lawnmower to its proper operating position
and commence mowing.
• NOTE - There are two start/stop levers fitted. Either
one can be used for starting the lawnmower.
• IMPORTANT - Do not use the start/stop levers intermit-
tently
To Stop your Lawnmower
1. Release the pressure on the Start/Stop lever.
WHEELS POSITION
Front position 2cm
Rear position 2cm
Front position 2cm
Rear position 4cm
Front position 4cm
Rear position 4cm
Front position 4cm
Rear position 6cm
Front position 6cm
Rear position 6cm