Configuring Pppoe; Configuring Pppoa - Encore ENDSL-A2+WIGX2 User Manual

5.3.3 Configuring PPPoE

PPPoE provides access control and billing functionality in a manner similar to dial-up
services using PPP. The router bridges a PPP session over Ethernet (PPP over Ethernet, RFC
2516) from your computer to an ATM Permanent Virtual Circuit (PVC) that connects to the ADSL
Access Concentrator, where the PPP session terminates. Single PVC can support any number
of PPP sessions from your LAN.
The following table describes the labels in this screen.
LABEL
Username
Password
VPI
VCI
Connection Type
Your ISP should provide the above information. Note that you must enter the user
name exactly as your ISP assigned it. If the assigned name is in the form of
domain identifies a service name, enter it exactly as given. Click on BACK to return to the
previous screen, on NEXT to continue, or on EXIT to exit the wizard without saving.

5.3.4 Configuring PPPoA

Point-to-Point Protocol over ATM Adaptation Layer 5 (AAL5) (PPPoA) provides access
control and billing functionality in a manner similar to dial-up services using PPP. The router
encapsulates the PPP session based on RFC1483 and sends it through ATM PVC to the ISP's
DSLAM.
Enter your username here.
Enter your password here.
Enter the VPI here. VPI can range from 0 to 255.
Enter the VCI here. VCI can range from 1 to 65535.
Select your connection type from the dropdown list.
DESCRIPTION
user@domain where
34