Connecting Wireless Endls-A2+Wigx2 Via Ethernet; Setup Wireless Adsl2+ Router Via Ethernet Cable; Configure Tcp/Ip - Encore ENDSL-A2+WIGX2 User Manual

Adsl2+ modem with four port ethernet and 802.11g wireless router

Hide thumbs Also See for ENDSL-A2+WIGX2:

Table of Contents

3. Connecting ENDLS-A2+WIGX2 via Ethernet

Your router can be managed from anywhere with the embedded Web configuration using a

Web browser, such as Microsoft Internet Explorer or Netscape Navigator. Internet Explorer 6.0

and later or Netscape Navigator 7.0 and later versions with JavaScript enabled should be used.

3.1 Setup ENDLS-A2+WIGX2 via Ethernet Cable

If there is an available LAN card present on your PC, you just simply connect ADSL router

and PC through the Ethernet cable. Once you establish Internet connection, you could browse

the Web through the Ethernet cable.

For Windows® 98SE and ME

Step 1:

Click Start then Settings and choose Control Panel

Step 2:

Double click Network icon.

Step 3:

Select Configuration tab, then choose TCP/IP from the list of installed network

Components and click Properties button.

Step 4:

You can setup the following configurations in two methods:

Table of Contents

Show Quick Links

Table of Contents