Roland Edirol R-44 Owner's Manual page 63

Project Name settings
fig.pj-name1.efig.pj-name1.eps
1
Press the R-44 [MENU] button.
The System Menu screen is shown on the Display.
fig.ps
2
Use the Cursor buttons [
, and press the [ENTER] button.
Name
The Project Name screen is shown.
fig.pj-name3.epspj-name2.eps
3
Use the Cursor buttons [
you want to edit, and press the [ENTER] button.
A screen for editing the project name is shown.
4
Use the Cursor buttons [
VALUE] dial, [PREV] button, and [NEXT] button to
edit the name.
When finished, press the [ENTER] button.
You are returned to the Project Name screen.
* If you decide to cancel, press the [EXIT] button.
Available characters
(space) !#$%&'()+,-.01234546789;=@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_` abcdefghijklmnopqrstuvwxyz{}
5
Press the [EXIT] button again to return to the Main screen.
If you want to make other system related settings, use the Cursor buttons [
item.
] [ ] to select
7 Project
] [ ] to select the name
] [ ] [ ] [ ], [SCRUB/
System setup
] [ ] to select the desired menu
63