Roland Edirol R-44 Owner's Manual page 31

● Record button [REC]
If you want to begin recording immediately, press the [REC] button.
Recording standby
If you want to put the R-44 in recording standby mode
to be ready to record, hold down the [PAUSE] button
and press the [REC] button.
During recording standby, the [REC] button blinks and the
Display alternates between REC and STANDBY.
When recording is paused, the [REC] button blinks. In
addition, the Display alternates between REC and PAUSE.
Press the [REC] or [PAUSE] button during recording standby
or while paused to start recording.
You can adjust input levels during record standby.
● Other settings
If you want to monitor the sound being recorded, connect headphones to the PHONES jack and use the
Monitor level knob to adjust the volume.
Adjusting the Monitor level knob does not affect the level of the sound actually being recorded.
To play the recorded sound, refer to "Playing back" (p. 41).
Recording-standby
Recording
31