Search Channels - Analog If; Add Data (Sat/Tp) - Sub-Menu - EchoStar DVR-5000 HDD Viaccess Supplementary Manual

Maintenance
Section 6
3.

SEARCH CHANNELS - ANALOG IF

1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Select for the Search Mode: Analog IF
3. Go to the Search channels field.
4. On the RCU, press the OK key.
5. Select Horizontal or Vertical polarity.
6. For one LNB, go to the Start field.
7. For more LNBs, select the applicable band.
8. Press the OK key
9. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
10. On the RCU:
a. press the OK key to save the settings;
b. press the EXIT key to leave the menu.
4.

ADD DATA (SAT/TP) - SUB-MENU

F D SE C1.2
OR I Q
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. In the SAT field:
a. Press the OK key to drop-down the menu;
b. Select satellite S00;
c. Press the OK key.
3. Note that the Add data menu appears. In this menu
you can create a new satellite and it's
transponders.
4. Continue with step 5.
Page 6 - 2
menu;
menu.
CONFIGURATIONS
menu;
menu.
EchoNAV 2.2