TRENDnet TEW-AP100PLUS User Manual page 7

11Mbps Wireless LNA Access Point User's Manual
DC Power Input
10/100BaseT
LAN Connection
RESET Button
Top Panel LED Indications
LED Color
DIAG Green
Ethernet
Green
Wireless Green
Power Green
Only use the power adapter supplied with the Access Point
Use standard Ethernet cable (RJ-45 connector) to connect your
PC, Hub, Switch or Router to this port.
The Access Point will re-boot while press the button.
Status
ON Diagnostic finished, the Access Point is ready
Blinking While powering on, the Access Point start executing
self-diagnostic
ON The LAN port is linked
Blinking The LAN port is sending or receiving data
OFF No wireless connection
Blinking Sending or Receiving data via wireless
ON The Access Point power on
OFF The Access Point power off
Description
7