Table of Contents
Advertisement
11Mbps Wireless LNA Access Point User's Manual
AP Basic Rate Set
The basic data transfer rate should be set depending on the speed of your wireless network.
If ALL had been chosen, the data rate will up to 11Mbps. And auto fallback will be supported.
Enable WEP
Enable or disable WEP function. If NO (default), data is NOT encrypted before being
transmitted.
Encryption Level
Select 64-bit or 128-bit WEP encryption.
WEP Mode
Mandatory or Optional.
Authentication Type
Select the appropriate value - "Open System" or "Shared Key". Check your Wireless card's
documentation to see what method to use. Some Wireless cards do not support both
methods.
Default Key
Select the key you wish to be the default. The default WEP key is 1.Transmitted data is
ALWAYS encrypted using the Default Key; the other Keys are for decryption only.
Key0, 1, 2, 3
This table is used when encrypting and decrypting data. All stations, including this Access
Point, always transmit data encrypted using their default key. The key number (0, 1, 2, 3) is
also transmitted. The receiving station will use the key number (0, 1, 2, 3) to determine which
key value to use for decryption. If the key value does not match the transmitting station,
decryption will fail.
20
Advertisement
Table of Contents
