Specifications - TRENDnet TEW-638PAP User Manual

Specifications
Hardware
Standards
Interface
LED Indicators
Buttons
Power Supply
Power Consumption
Dimensions
(LxWxH)
Weight
Temperature
Humidity
Certifications
Wireless
Modulation Technique
Modes
Antenna
Frequency
Data Rate (Auto Fallback)
Output Power
Receiving Sensitivity
Encryption
Channels
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and
coverage will vary depending on interference, network traffic, building materials and other conditions.
IEEE 802.11n, 802.11b, 802.11g, , 802.11e and 802.3af
1 x 10/100Mbps Auto-MDIX PoE LAN port
Power, LAN, WPS, and Wireless
Reset button – restores factory default settings
WPS button - initiates WPS function
On/off power switch
12V DC 0.5A external power adapter
3.12 watts
120 x 26 x 88mm (4.7 x 1.0 x 3.4in.)
145g (5.11oz)
Operating: 0° ~ 40°C (32° ~ 104°F), Storage: -20°C ~ 60°C (-4° ~ 140°F)
Operating: 5% ~ 90% non-condensing, Storage: 5% ~ 90% non-condensing
CE, FCC
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Access Point, Wireless Distribution System (WDS in AP mode), AP Client
2 x 2dBi detachable antennas
2.412 - 2.472 GHz
802.11n: up to 300Mbps
802.11g: up to 54Mbps
802.11b: up to 11Mbps
802.11n: 12dBm (typical)
802.11g: 15dBm (typical)
802.11b: 18dBm (typical)
802.11n: -66dBm (typical)
802.11g: -74dBm (typical)
802.11b: -84dBm (typical)
64/128-bit WEP, WPA/WPA2-RADIUS, WPA/WPA2-PSK
1-11 (FCC), 1-13 (ETSI)
Page 62