2. Getting Start
2.1 Know the Wireless Super G Access Point
Ports:
●
Power Receptor
●
Reset Button
●
RJ-45 Ethernet Port
LEDs:
●
Power LED: ON when the unit is powered up
●
LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
●
WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.
2.2 Connect to the Wireless Super G Access Point
Build the Infrastructure Mode
In order to setup an Infrastructure wireless network such as the example shown
above, you will need the following:
1. A broadband Internet connection.
2