TRENDnet TEW-450APB User Manual page 8

Step 3: Set WEP Encryption
If you like to enable WEP, please click "Enabled". Then, select the key size of
WEP encryption and enter the key value in the key text box. Then click "Next"
to continue.
Step 4: Restart
The Setup wizard is now completed. The new settings will be effective after the
Access Point restarted. Please click "Restart" to reboot the Access Point. If
you do not want to make any changes, please click "exit" to quit without any
changes. You also can go back to modify the setting by clicking "Back".
6