TRENDnet TEW-450APB User Manual page 17

TX Rates (MBps): Select one of the wireless communications transfer rates, measured
in megabytes per second, based upon the speed of wireless adapters connected to the
WLAN.
CTS Mode (clear to send): None- disable CTS function. Always- Regardless of
wireless environment (11b or 11g), platform will always transfer 11b packet.
Auto- AP soon detected the wireless environment and decided the transmission
packet, either 11b or 11g.
WDS (Wireless Distribution System): For AP Client mode and Repeater mode.
It will add client quantity at the back when you enable this function.
11g Only Mode: If selected the Enable, only allow 802.11g WLAN client
communicate with this WLAN Router
TM
Super G mode: From the drop list, if you want to use Super-G to enhance the
TM
speed, there are three options on Super-G mode: Super G without turbo;
Super G with Dynamic turbo and Super G with Static turbo. The turbo mode
indicates the combination of two channels to enhance the throughput. Super G
without turbo indicates that it is on Super G mode without the channel's
TM
combination. Dynamic turbo is able to automatically detect if any 'Super-G
based' product is available. If no, the connection is via 'normal' G. Static turbo
means it will not go back to 'normal' G once it starts.
Antenna Transmit Power: Adjust the power of the antenna transmission by
selecting from the dropping list.
Aging Interval: To limited STA connect timing.
15