Exit Screen; System And Setup Password Features; Using The System Password - Dell PowerEdge 860 Hardware Owner's Manual

Table 2-6. System Security Screen Options (continued)
Option
NMI Button
AC Power Recovery
(Last default)

Exit Screen

After you press <Esc> to exit the System Setup program, the Exit screen displays the following options:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup

System and Setup Password Features

NOTICE:
The password features provide a basic level of security for the data on your system. If your data requires
more security, use additional forms of protection, such as data encryption programs.
NOTICE:
Anyone can access the data stored on your system if you leave the system running and unattended
without having a system password assigned or if you leave your system unlocked so that someone can disable the
password by changing a jumper setting.
Your system is shipped to you without the system password feature enabled. If system security is a concern,
operate your system only with system password protection.
To change or delete an existing password, you must know the password (see "Deleting or Changing an
Existing System Password" on page 39). If you forget your password, you cannot operate your system or
change settings in the System Setup program until a trained service technician changes the password
jumper setting to disable the passwords, and erases the existing passwords. This procedure is described in
"Disabling a Forgotten Password" on page 101.

Using the System Password

After a system password is assigned, only those who know the password have full use of the system. When
the System Password option is set to Enabled, the system prompts you for the system password after the
system starts.
Description
This field enables/disables the NMI button on the front panel.
NOTICE:
Use the NMI button only if directed to do so by
qualified support personnel or by the operating system's
documentation. Pressing this button halts the operating system
and displays a diagnostic screen.
Sets the NMI feature On or Off.
Determines how the system reacts when power is restored to the
system. If system is set to Last, the system returns to the last power
state. On turns on the system after power is restored. When set to
Off, the system remains off after power is restored.
Using the System Setup Program
37