Dell PowerEdge 860 Hardware Owner's Manual page 13

Table 1-2. Front-Panel Components (continued)
Item Component
6 System status indicator
7 System identification button
8 Hard drive 1
9 Hard drive 0
10 Optical drive
11 Bezel
12 NMI button
Icon Description
The blue system status indicator lights up during
normal system operation.
The amber system status indicator flashes when the
system needs attention due to a system problem.
You can use the system identification buttons on the
front and back panels to locate a particular system
within a rack. When one of these buttons is pushed, the
blue system status indicators on the front and back
panels blink until one of the buttons is pushed again.
You can also use the systems management software to
cause the indicators to flash to identify a particular
system.
Optional 3.5-inch SAS or SATA hard drive.
A 3.5-inch SAS or SATA hard drive.
Optional.
Optional
The NMI button is used to troubleshoot software and
device driver errors when using certain operating
systems. This button can be pressed using the end of a
paper clip. Use this button only if directed to do so by
qualified support personnel or by the operating system's
documentation.
About Your System
13